Garde Arts Center in New London, CT Cinema Treasures FP7050 Flexible Decorative Polyurethane Panel Molding, Flexible, Primed White. Length: 78 3 4" Height: 2 3 16". [[start tab]] Description Lightweight Impact Resistant Easy to Install Code : Luxxus Style : Classic Material : Polyurethane [[end tab]] [[start tab]] Measurements Length : 78 3 4" Height : 2 3 16 " Projection : 1" Design Repeat : 3 1 8" [[end tab]] [[start tab]] Installation 1. SURFACE CEILING WALL 2. WORKING CONDITIONS Storage & Installation conditions for Orac Decor products and Decofix. Place profiles & adhesives at room temperature 24 hrs before installation. Use Decofix Pro for porous or Decofix Hydro for non porous surfaces. Extra attention for glues on wallpaper !!! Preferably use DecoFix Hydro & Decofix Extra for new build projects. Adhesion of paint or plaster on wall must be perfect When in doubt about surface, please contact Orac. Only full guarantee with Decofix. 3. GLUES DecoFix Pro FDP500 310ml 7 8m FDP600 4200ml 65 110m Strong,water based acrylic glue Long lasting seal between mouldings and the wall and or ceiling For interior applications and porous surfaces ( not for humid spaces or outside) Remove with humid sponge or cloth Should be kept frost free DecoFix Extra FX200 310ml min. 80m FX210 80ml min. 20m Polyurethane based glue Seam joints between the mouldings Remove excess glue before hardening ( max. 1 hours and repeat after 2 3 hours) Clean with acetone or Synth Thinner Can be painted after 24 hrs The more humidity, the faster the drying time DecoFix Hydro FDP700 290 ml 7 8 m Extra strong MS polymer glue For exterior applications, damp environments, non porous surfaces (tiles, glass, ) Remove with soap solution 4. INSTALLATION Inner Corner Outer Corner NOTES TO REMEMBER: Joints have to be dust free. Use DecoFix Hydro for exterior applications, humid areas, non porous surfaces and for newly build houses with high humidity and low temperature DecoFix Pro or Hydro should be used over the complete length of the profiles and the full width of the gluing area The V Fix is only for guiding the nozzle Push products firmly and evenly against the wall and ceiling ( every 10 cm) Use stainless steel nails to support bigger profiles and indirect lighting profiles. Use DecoFix Extra in every joint (not only for corners) on one side of the profiles already installed. Apply enough DecoFix Extra; excess must come out of the front and the back. Wipe of with acetone or similar product. [[end tab]]